Department of Health and Human Services
|Public Health Service|
Food and Drug Administration
555 Winderley Place, Suite 200
Maitland, Florida 32751
VIA UPS NEXT DAY AIR
w/ DELIVERY CONFIRMATION
November 10, 2014
Benjamin H. David, President
Wells Pharmacy Network, LLC
3420 Fairlane Farms Road, Suite 300
Wellington, FL 33414
Dear Mr. David:
From July 22, 2013, to July 26, 2013, from February 21, 2014, to March 7, 2014, and from May 30, 2014 to June 19, 2014, U.S. Food and Drug Administration (FDA) investigators conducted inspections of your facility, Wells Pharmacy Network, LLC, located at 1210 SW 33rd Avenue, Ocala, FL 34474. During the inspections, the investigators noted that you were not receiving valid prescriptions for individually-identified patients for a portion of the drug products you were producing. In addition, the investigators observed serious deficiencies in your practices for producing sterile drug products, which could lead to contamination of the products, which put patients at risk. For example, we observed your technicians wearing non-sterile gowns while performing aseptic operations and documented that your firm does not use sporicidal agents to disinfect the ISO-5 areas. We also documented that your firm fails to perform (b)(4) on the non-pharmaceutical grade (b)(4) used to sterilize some of your injectable products and consequently lacked assurance that these (b)(4) were suitable for intended use. Therefore your products may be produced in an environment that poses a significant contamination risk. FDA issued a Form FDA 483 to your firm on July 26, 2013, March 7, 2014, and June 19, 2014.
Based on these inspections, it appears that you are producing drugs that violate the Federal Food, Drug, and Cosmetic Act (FDCA).
A. Compounded Drugs Under the FDCA
When FDA inspected your facility in July 2013, there were conflicting judicial decisions regarding the applicability of section 503A of the FDCA [21 U.S.C. § 353a], which exempts compounded drugs from several key statutory requirements if certain conditions are met. Nevertheless, receipt of valid prescriptions for individually-identified patients prior to distribution of compounded drugs was relevant for both section 503A of the FDCA and the agency’s Compliance Policy Guide 460.200 (CPG) (2002), which was then in effect. During this FDA inspection, investigators observed that your firm does not receive valid prescriptions for individually-identified patients for a portion of the drug products you produce. Based on this factor alone, those drugs were not entitled to the statutory exemptions for compounded drugs described in section 503A of the FDCA and did not qualify for the agency’s exercise of enforcement discretion set forth in the CPG.
Subsequent to the initial FDA inspection, Congress enacted and the President signed into law the Compounding Quality Act (CQA), which amended FDCA section 503A by eliminating the advertising restrictions that had been the basis for conflicting judicial decisions. The CQA otherwise left section 503A intact, and so clarified that the remainder of section 503A, including the requirement of valid prescriptions for individually-identified patients, is applicable in every federal judicial circuit. When FDA inspected your facility in March 2014 and May 2014, the investigators noted that you still were not receiving valid prescriptions for individually identified patients for a portion of the drug products you were producing. Accordingly, the drugs you compound without valid prescriptions for individually-identified patients are not entitled to the exemptions in section 503A.
In addition, we remind you that there are a number of other conditions that must be satisfied to qualify for the exemptions in section 503A of the FDCA.
B. Violations of the FDCA
Because the drug products that you manufacture and distribute without valid prescriptions for individually-identified patients are not the subject of approved applications, they are unapproved new drugs and misbranded drugs in violation of sections 505(a) and 502(f)(1) of the FDCA [21 U.S.C. §§ 355(a) and 352(f)(1)], respectively. In addition, your sterile drug products are prepared, packed, or held under insanitary conditions whereby they may have been contaminated with filth, or whereby they may have been rendered injurious to health. As such, all sterile drug products you manufacture are adulterated within the meaning of section 501(a)(2)(A) of the FDCA [21 U.S.C. § 351(a)(2)(A)]. Furthermore, because you manufacture and distribute drugs without valid prescriptions for individually-identified patients, the manufacture of those drugs is also subject to FDA’s Current Good Manufacturing Practice (CGMP) regulations for Finished Pharmaceuticals, Title 21, Code of Federal Regulations (CFR), Parts 210 and 211. FDA investigators observed significant CGMP violations at your facility, causing such drug product(s) to be adulterated within the meaning of section 501(a)(2)(B) of the FDCA [21 U.S.C. § 351(a)(2)(B)].
Unapproved New Drug Products
You do not have any FDA-approved applications on file for the drug products for which you have not obtained valid prescriptions for individually-identified patients. Under sections 301(d) and 505(a) of the FDCA [21 U.S.C. §§ 331(d) and 355(a)], a new drug may not be introduced into or delivered for introduction into interstate commerce unless an application approved by FDA under section 505 of the FDCA is in effect for the drug. Your marketing of these products, or other applicable products, without an approved application violates these provisions of the FDCA.
Misbranded Drug Products
Because the drug products for which you have not obtained valid prescriptions for individually-identified patients are intended for conditions that are not amenable to self-diagnosis and treatment by individuals who are not medical practitioners, adequate directions cannot be written for them so that a layman can use these products safely for their intended uses. Consequently, their labeling fails to bear adequate directions for their intended uses, causing them to be misbranded under section 502(f)(1) of the FDCA, and they are not exempt from the requirements of section 502(f)(1) of the FDCA (see, e.g., 21 C.F.R. 201.115). The introduction or delivery for introduction into interstate commerce of these products therefore violates sections 301(a) of the FDCA [21 U.S.C. § 331(a)]. It is a prohibited act under section 301(k) of the FDCA [21 U.S.C. § 331(k)] to do any act with respect to a drug, if such act is done while the drug is held for sale after shipment in interstate commerce of the components used to make the drug and results in the drug being misbranded.
Additionally, FDA investigators noted that your sterile drug products were prepared, packed, or held under insanitary conditions, whereby they may have become contaminated with filth or rendered injurious to health, causing your drug products to be adulterated under section 501(a)(2)(A) of the FDCA. Examples of these conditions include technicians wearing non sterile gowns while performing aseptic operations, failure to use sporicidal agents in the ISO-5 areas, the use of non-pharmaceutical grade (b)(4) to sterilize aseptically-produced injectables, and failure to conduct (b)(4).
FDA investigators also noted CGMP violations at your facility, causing the drug products for which you have not obtained valid prescriptions for individually-identified patients to be adulterated under section 501(a)(2)(B) of the FDCA. The violations include, for example:
1. Your firm failed to establish and follow appropriate written procedures that are designed to prevent microbiological contamination of drug products purporting to be sterile, and that include validation of all aseptic and sterilization processes (21 CFR 211.113(b)).
2. Your firm failed to establish and follow an adequate written testing program designed to assess the stability characteristics of drug products and to use results of such stability testing to determine appropriate storage conditions and expiration dates (21 CFR 211.166(a))
3. Your firm failed to establish an adequate system for cleaning and disinfecting the room and equipment to produce aseptic conditions (21 CFR 211.42(c)(10)(v)).
4. Your firm failed to establish an adequate system for monitoring environmental conditions in aseptic processing areas (21 CFR 211.42(c)(10)(iv))
5. Your firm failed to ensure that manufacturing personnel wear clothing appropriate to protect drug product from contamination (21 CFR 211.28(a)).
6. Your firm failed to establish adequate written procedures for production and process control designed to assure that the drug products you manufacture have the identity, strength, quality, and purity they purport or are represented to possess (21 CFR 211.100(a))
Under section 301(a) of the FDCA [21 U.S.C. § 331(a)] the introduction or delivery for introduction into interstate commerce of any drug that is adulterated is a prohibited act. Further, it is a prohibited act under section 301(k) of the FDCA [21 U.S.C. § 331(k)] to do any act with respect to a drug, if such act is done while the drug is held for sale after shipment in interstate commerce of the components used to make the drug and results in the drug being adulterated.
C. Corrective Actions
In your responses to the three Form FDA 483s dated August 14, 2013, March 20, 2014, and August 14, 2014, respectively, you referenced your purported compliance with United States Pharmacopeia (USP) National Formulary (NF) General Chapter <797>, “Pharmaceutical Compounding - Sterile Preparations.” As noted above, your firm has manufactured and distributed drugs without valid prescriptions for individually-identified patients, and the manufacture of such drugs is subject to FDA’s drug CGMP regulations, 21 CFR Parts 210 and 211. Should your facility continue to compound drug products without valid prescriptions for individually-identified patients, you should fully implement corrective actions that meet the minimum requirements of 21 CFR Part 211 in order to provide assurance that the drug product(s) produced by your firm conform to the basic quality standards that ensure safety, identity, strength, quality, and purity.
In addition to the issues discussed above, you should note that CGMP requires the implementation of quality oversight and controls over the manufacture of drugs, including the safety of raw materials, materials used in drug manufacturing, and finished drug products. See, FDCA, as amended by the Food and Drug Administration Safety and Innovation Act (Pub.L. 112-144, Title VII, section 711). We note that you have chosen to hire a contract testing laboratory to perform some of the required testing of your finished drug products. FDA inspected this laboratory in 2013 and observed deficiencies in its practices. If you choose to contract with a laboratory to perform some functions required by CGMP, it is essential that you select a qualified contractor, and you maintain sufficient oversight of the contractor’s operations to ensure that it is fully CGMP compliant. Regardless of whether you rely on a contract facility, you are responsible for assuring that drugs you introduce into interstate commerce are neither adulterated nor misbranded. See, 21 CFR 210.1(b), 21 CFR 200.10(b).
FDA strongly recommends that your management immediately undertake a comprehensive assessment of your manufacturing operations, including facility design, procedures, personnel, processes, materials, and systems. In particular, this review should assess your aseptic processing operations. A third party consultant with relevant sterile drug manufacturing expertise could be useful in conducting this comprehensive evaluation.
In addition, you should correct the violations of FDCA sections 501(a)(2)(A), 502(f)(1) and 505(a) noted above.
The violations cited in this letter are not intended to be an all-inclusive statement of violations at your facility. You are responsible for investigating and determining the causes of the violations identified above and for preventing their recurrence or the occurrence of other violations. It is your responsibility to ensure that your firm complies with all requirements of federal law and FDA regulations.
You should take prompt action to correct the violations cited in this letter. Failure to promptly correct these violations may result in legal action without further notice, including, without limitation, seizure and injunction. FDA may re-inspect to verify corrective actions have been completed.
Within fifteen working days of receipt of this letter, please notify this office in writing of the specific steps that you have taken to correct violations. Please include an explanation of each step being taken to prevent the recurrence of violations, as well as copies of related documentation. If you do not believe that the products discussed above are in violation of the FDCA, include your reasoning and any supporting information for our consideration. If you cannot complete corrective actions within 15 working days, state the reason for the delay and the time within which you will complete the correction. Your notification should be addressed to:
FDA Florida District Office
U.S. Food and Drug Administration
555 Winderley River Place, Suite 200
Maitland, FL 32751
If you have questions regarding any issues in this letter, please contact our office at 407-475-4700.
Susan M. Turcovski
Director, Florida District
 Compare Western States Med. Ctr. v. Shalala, 238 F.3d 1090 (9th Cir. 2001) with Medical Ctr. Pharm. v. Mukasey, 536 F.3d 383 (5th Cir. 2008).
 The CPG set forth a non-exhaustive list of factors that FDA considered in determining whether to take enforcement action when the scope and nature of a pharmacy's activities raised concerns. This CPG has been withdrawn in light of new legislation. See below.
See 21 U.S.C. § 353a(a) (granting compounded drugs statutory exemptions if, among other things, “the drug product is compounded for an identified individual patient based on the…receipt of a valid prescription order or a notation, approved by the prescribing practitioner, on the prescription order that a compounded product is necessary for the identified patient…”); CPG at 2 (“FDA recognizes that pharmacists traditionally have extemporaneously compounded and manipulated reasonable quantities of human drugs upon receipt of a valid prescription for an individually-identified patient from a licensed practitioner. This traditional activity is not the subject of this guidance.”).
Drug Quality and Security Act, Public Law 113-54, 127 Stat. 587 (Nov. 27, 2013).
The CQA contains a number of other provisions, including new exemptions and requirements for compounders seeking to operate as outsourcing facilities. A discussion of the CQA and the agency’s plans to implement the new law may be found at http://www.fda.gov/Drugs/GuidanceComplianceRegulatoryInformation/PharmacyCompounding/default.htm.
 For example, section 503A also addresses anticipatory compounding, which includes compounding (not distribution) before receipt of a valid prescription order for an individual patient. We are not addressing anticipatory compounding here.
 The specific products made by your firm are drugs within the meaning of section 201(g) of the Act, [21 U.S.C. § 321(g)] because they are intended for use in the diagnosis, cure, mitigation, treatment, or prevention of diseases. Further, they are “new drugs” within the meaning of section 201(p) of the FDCA [21 U.S.C. § 321(p)] because they are not generally recognized as safe and effective for their labeled uses.
This page was posted on March 13, 2019.